The VACFILLER 10 machine is designed for manually filling very small batches of ampoules.

Standard stainless steel design comprising two modules intended for bench-top installation.

It is perfect for laboratory sampling requirements as well as those of R&D departments when there is a product launch.

Its design, its simplicity of use, and its studied ergonomics guarantee that small-batch production will have as good a quality as that obtained from our higher-capacity fillers.

Machines de remplissage d'ampoules VACFILLER 10
VACFILLER 10 capacity
Up to 10 crystallizing dishes per hour (measured on mains water)

VACFILLER 10 capacity

Up to 10 crystallizing dishes per hour (measured on mains water)

Adaptable filling machines

The VACFILLER 10 assembly is very flexible in adapting to sampling requirements or R&D departments.

Small footprint

Ergonomic and compact, the VACFILLER 10’s two modules fit on a bench-top and are easy to integrate in any type of laboratory.

Compliant with BPF and FDA specifications

The whole of the VACFILLER range complies with BPF (French good practice in manufacturing) and FDA requirements for pharmaceutical industry products and dietary complements.

VACFILLER 10 : the manual filler and sealer for fine-tip ampoules

The VACFILLER 10 consists of two modules for manually filling and sealing small batches of fine-tip ampoules.

The two machines fit on a bench-top.

Remplisseuse d'ampoules VACFILLER 10 de Deremaux Sarl

Filling module


A low-cost solution for filling small batches of ampoules !

The VACFILLER 10 can be used for filling small batches  of fine-tipped ampoules very simply and reliably.

This machine, which fits on a bench top, sells at a very affordable price, ensuring a quick payback.

Moreover, it features the same advantages as the other fillers in the VACFILLER range.

The VACFILLER 10 machine fills ampoules with extreme accuracy, guaranteeing reliability and quality.

Ergonomic and intuitive, the VACFILLER 10 machine has a short learning curve thanks to its simplicity of use.

VACFILLER modules are standard design machines. Maintenance is therefore performed using commonly available parts.

By filling their ampoules in-house, laboratories maintain full control over the packaging chain, especially on quality and lead-time.

The VACFILLER 10 meets a well-defined requirement, ensuring perfect productivity, and accordingly a very short payback time.

Designed for fast, high-quality filling of ampoules in very small batches !

The simplicity of use and studied ergonomics of the VACFILLER 10’s two modules makes it ideal for filling and sealing fine-tip ampoules in small quantities (around 1000 x 10ml ampoules per hour’s running).

Simple, practical, intuitive learning curve

  • Manual loading and unloading ;
  • Fast changeover of format -> short preparation times ;
  • Automatic filling cycle ;
  • Closure by heat-sealing on the fly ;
  • Manual lighting and extinguishing of the flame.

Installation prerequisites

  • 220V 50Hz power supply ;
  • Compressed air, propane ;
  • Cold water/hot water.

Schéma avec côtes

For filling industrial volumes of ampoules, see our other VACFILLER models.

VACFILLER 10 : Excellence in the manual filling of small batches of ampoules in the laboratory !

The VACFILLER 10 ampoule filler is designed to fulfil the requirements of laboratories performing analysis, calibration, or sampling on small quantities.

VACFILLER machines de remplissage d'ampoules à pointe pour laboratoire

The VACFILLER 10 machine packages liquids in ampoules made of glass or plastic such as double-tipped ampoules, ampoule bottles, or Flackpull membrane ampoules.

to 1 from 20 ml
ampoules 2 pointes

Double-tipped ampoules

ampoules bouteilles

Flackpull membrane ampoules

Ampoules operculées Flackpull

Ampoule bottles